lozova.org
Blog
Controlling slurry density in hydrocyclone operations for efficiencyHydrocyclones are compact, high-capacity classifiers, but their performance depends heavily on the condition of the feed slurry. Solids concentration, water…
Gravity Separation Strategies for Chromite RecoveryChromite processing depends on separating a dense chromium-bearing mineral from lighter gangue such as serpentine, olivine, talc, and silica. Because the…
Designing a Grinding Circuit for an 80% Passing 75-Micron TargetA product specification of 80% passing 75 microns, often written as P80 = 75 µm, gives a grinding project a clear performance objective. It does not, however,…
Evaluating jaw crusher wear parts: manganese vs. chrome alloyJaw crushers work under severe compressive and abrasive forces. Every feed cycle pushes the fixed and movable jaw plates against rock, creating impact,…
Optimizing thickener underflow density for downstream filtrationThickener underflow density has a direct influence on filtration capacity, cake moisture, pump energy, and water recovery. When the underflow is too dilute,…
Pre-commissioning checklist for a new copper flotation circuitA new copper flotation circuit should enter commissioning with every mechanical, electrical, process, and safety requirement verified. The pre-commissioning…
Vibrating screen selection for stroke, speed, and deck angleVibrating screens are essential for separating crushed or ground material by particle size, but selecting the right machine involves more than matching a…
Why Mobile Ore Handling Can Improve Mine EconomicsMining projects are under constant pressure to lower operating costs, reduce emissions, and maintain reliable production as pits become deeper and haul routes…
Planning a Safer, Higher-Output Crushing and Screening AuditA crushing and screening plant audit is more useful when it is treated as an operational investigation rather than a short equipment walk-through. The…
Testing CIL and CIP for a Specific Oxide Gold OreSelecting between carbon-in-leach and carbon-in-pulp is a metallurgical decision, not a generic equipment choice. Both circuits use activated carbon to recover…